Fit your ReVace Awning Rails

Please read these instructions in their entirety before commencing fitment.  Upon opening your ReVace Awing Rail please check the following.

• Check your awning rail is in good condition and not damaged. (There should be a slight bend in the rail towards the front of the rail).
• That all parts are included in the parts list.
• The LED lights are operational – check this by briefly touching the cable ends to a 12v battery or power source.

Before the rail is permanently fitted, we would always recommend a trial dry fit – securing the rail and end caps onto the van with tape and clamps. This will allow you identify the final position and help visualise the fitting process.