Battery Terminal – Positive and Negative Clamp Set
12v Cigarette Lighter Socket
12v Cigarette Lighter Socket
A compact, neat solution to allow a variety of 12v appliances to run from your leisure battery.The 12v socket comes with a threaded stem and nut so its easy to fit into your campervan side furniture or straight into the panelling of your van/motorhome, regardless of the material thickness.Digital Battery Voltmeter
Digital Battery Voltmeter
Universal voltmeter for installation in the combination module housing.Digital display red, 3 digits.10-30 volts. Display of the applied current in Volt.Ideal for battery monitoring.Sargent EC160 Power Management Unit – Brushed Nickel
Sargent EC160 Power Management Unit (Vertical)
This plug and go power management unit is ideal for first time Campervan/motorhome self builders. The 240v consumer unit, 240v battery charger and 12v fuse box and distribution panel are all pre-wired into one compact unit. This unit has easy to connect terminals for both 12v and 240v, ready to connection to your various 12v and 240v facilities. The unit has built in 240v battery charging, as well as a built in consumer unit with MCB and RCD protection.
This one unit takes the place of all the separate components often found in power management kits, making perfectly suited for self builders. We would always recommend that these units are installed or checked and signed off by qualified electricians before use.Please note that this listing is for the Brushed Nickel finish and is currently only available in a Vertical orientation.Sterling B2B Charger with Installation Kit
Sterling B2B Charger with Installation Kit
Battery to Battery chargers are fast becoming standard requirements on a lot of the newer vehicles such as the VW T6 and Ford Custom. This is due to the more sophisticated alternator and regenerative braking systems the new model vans have installed. On such vehicles standard Voltage sensing relays won't properly and may even prove to be a fire hazard. Easy to install for self builders, the unit comes with wiring instructions that are easy to follow.Includes:- Sterling Battery to Battery Charger
- Earth Strap
- 2 x 30amp Fuses and Fuse Holders
- Heat Shrink Tube
- 84 Strand Wire
- Butt Connectors and Ring Crimps
12v Control Panel with 5 Switches,12v USB,12v Socket & Battery Monitor
Sterling B2B Charger
Sterling B2B Charger
Battery to Battery chargers are fast becoming standard requirements on a lot of the newer vehicles such as the VW T6 and Ford Custom. This is due to the more sophisticated alternator and regenerative braking systems the new model vans have installed. On such vehicles standard Voltage sensing relays won't properly and may even prove to be a fire hazard. Easy to install for self builders, the unit comes with wiring instructions that are easy to follow.Sargent EC160 Power Management Unit
Sargent EC160 Power Management Unit (Horizontal)
This plug and go power management unit is ideal for first time Campervan/motorhome self builders. The 240v consumer unit, 240v battery charger and 12v fuse box and distribution panel are all pre-wired into one compact unit. This unit has easy to connect terminals for both 12v and 240v, ready to connection to your various 12v and 240v facilities. The unit has built in 240v battery charging, as well as a built in consumer unit with MCB and RCD protection.
This one unit takes the place of all the separate components often found in power management kits, making perfectly suited for self builders. We would always recommend that these units are installed or checked and signed off by qualified electricians before use.Sargent AC50X Power Control Panel
Sargent AC50X Power Control Panel
A well laid out control panel providing clear individual switches to your campervan 12v facilities, finished with a CBE anthracite surround.On/Off Control to 12v outputs Light switch Pump Switch Battery condition monitorPC210 Power Management Kit
Black PC 210 Power Management Kit A complete power management system with CBE control panel
The PC210 is a modern digital display overseeing your power management control, suited to medium sized van conversions and motorhomes. The kit allows complete control over your electrical system from and acts as a hub for all your 12v and 240v facilities.Facilities of the PC210 control unit/kitDigital clock, Car and leisure battery 12v indicator, Internal & external temperature indicator, Control lights, Control water pump, Control external light, Batteries parallel relay, Control fridge, Multiple protection fuses for 12v facilities, 240v recharging of Batteries Save service battery function.PC100 Power Management Kit
PC100 Power Management Kit. A complete power management system with CBE control panel
The PC100 is a neat looking power distribution panel ideally suited to medium sized van conversions and motorhomes. The kit allows complete control over your electrical system from and acts as a hub for all your 12v and 240v facilities.Facilities of control unit; Car battery control & service battery control, Drinking water tank level control, External/internal temperature display, Lights control, Water pump control, External light control, Fridge control, Battery parallel relay protection fuses, Battery recharge control, Minimum voltage device control.Widney 700w Plinth Heater
Widney 700w Plinth Heater (240v)
Compact, these units can be tucked out of the way and built in to surrounding furniture quite easily. The offer efficient heating and are fan assisted so the warm air is rapidly moved around the van to warm the whole space.
The 700 watt rating on this heater is ideally suited to medium sized van and motorhome conversions
Zig CF8 240v Battery Charger/Power Management Unit
Zig CF8 240v Battery Charger/Power Management Unit
Zig are a long established company with their products fitted into a wide range of caravans and motorhomes. We sell this unit primarily as a replacement unit for those of you who's CF8 has stopped working, and is beyond repair (this can happen for a variety of reasons). If you already have this unit in place then the replacement of it is fairly straight forward, though we would always recommend that you have it checked/fitted by a qualified technician or electrician.If you plan to us this unit as part of a new installation you will also need to purchase a separate consumer unit, as unlike other brands the CF8 doesn't come with the MCB and RCD consumer unit built in. For this reason we usually recommend the PMS3 unit as a more suitable option for self build of new installations.240v Tower Sockets with USB
- Easy to install. No Wiring Necessary
- Three 240v sockets & Two USB Ports
- Aluminium and black finish
- Two metres pre-wired cable
- Isolator switch with neon indicator
- 5v 2.1A
- IP54 / BS EN 60529 when in the retracted position.
PMS3 240v Power Management System
PMS3 Power Management System with 240v Inlet and Sockets
PMS3 Power Management System with 240v Inlet and Sockets
The Power Management System PMS3 is a 230 Volt AC mains and 12 Volt DC power control unit, providing all the necessary features or the control of the electrics in your caravan, camper van, motor home and/or horsebox. This unit is designed to work with a battery in the circuit, for optimum performance a good quality leisure battery is recommended.To include:- PMS3 Power Management System (Horizontal or Vertical)
- 240v Inlet - allows you to connect into the power supply via the side of your van (Black, White or Underslung)
- 2 x CBE 3 pin sockets
- 1 x CBE frame
- 1 x CBE frame cover in Flatline Silver
- 3m 2.5mm arctic flex
Sargent EC160 Power Management System with 240v Inlet and Sockets
- Sargent EC160 power management system
- 240v inlet - allows you to connect into the power supply via the side of your van, Black or White inlet
- 2 x CBE 3 pin sockets
- 1 x CBE frame
- 1 x CBE frame cover in flatline silver (graphite or black available for telephone orders)
- 1 x 3m 2.5mm arctic flex
This unit provides the following features:-
16A input via wired 2m lead RCD & MCB protected with reverse polarity indication Built in 12 amp, 13.8v fixed voltage battery charger with on/off switch 3 x 10A MCB outputs 2 x 15A battery inputs 5 x outputs via screw terminal black Pump output via pump switch & 5A fuse Lights output via lights Aux switch & Aux 10A fuse Permanent output via 5A fuse Fridge output VA 15A fuse (3 way fridge) Built in split charge relay (configurable) Built in EMC isolation relay (configurable) Digital voltmeter with on/off switch
This unit is available as a vertical or horizontal unit.For the other colour options, please call us to purchase on 01271 373853.Sargent EC155 Kit with EC50 Interface,Campervan Power Management + Consumer Unit
CBE PC180 Power Management, Consumer Unit & Battery Charger
240v Hook-up Kit, 240v Sockets and RCD & MCB Consumer Unit
Consumer Unit RCD/MCB Protection
Consumer Unit RCD/MCB Protection
Ideal for campervan conversionsProduct Features:63A RCD1 x 6A MCB & 1 x 16A MCBTest buttonThis has a metal casing so conforms to 18th Edition Electrical StandardsDigital 12v Battery Condition Monitor
Power Inverter 150w – 12v to 240v
Mobile Mains Power Unit, 3 x 240v sockets and 2 x USB sockets with RCD & MCB – 15m Cable
Hook Up Cable (10m or 25m)
240v Hook-up Inlet – Black, White or Underslung
240v Hook-up Inlet - Black, White or Underslung
The 240v Hook-up Inlet is a component which would be integrated into the vehicle body allowing you to hook your van up to a 240 volt supply at any campsite.