Smev 8005 Sink and Plumbing Kit
Smev 8005 Sink and Plumbing KitThe Smev 8005 is a neat, well-proportioned sink with a darkened glass cover/splash back. It is often paired with the Smev 8062 twin hob in campervans, motorhomes and caravans. The advantage of having a separate hob and sink units over the combination units are being able to have space in between them for food preparation etc.
The sink comes complete with a high flow rate, micro-switched tap and waste outlet including;1 x Smev 8005 sink with glass lid 420mm Left to Right 370mm Front to Back
1 x micro-switched tap
1 x 14l/min submersible pump
1 x 20l water container
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core cable
2 x hose clips
6 x cable connector crimps
Smev 8322 Double Hob & Sink, Full Installation Kit to EN1949 and Water container
Smev 8322 Double Hob & Sink, Full Installation Kit to EN1949 and Water containerSize Width - 680mm, Depth - 440mm, Height - 130mm (without waste attached)Size Width - 680mm, Depth - 440mm, Height - 130mm (without waste attached)
This is one of our most popular installation kits ideally suited to small/mid sized campervan conversions. The components supplied allow the installation to comply with regulation requirements EN1949, this is important for permanent installations to cover insurance requirements.
It is recommended that this kit is installed, or the installation tested by qualified fitters/engineers.Included:
1 x Smev 8322 Double hob and sink with glass lid
1 x 8 mm EN 1949 Cavana regulator - Bulkhead mounted.
1 x Butane gas pigtail
1 x 907 camping gas adaptor
1 x 8mm compression joint
2 x gas vents
2m of 8mm copper pipe
1 x micro-switched tap
1 x waste outlet and plug
1 x 10l/per min submersible pump
1 x water Container
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
2 x hose clips
6 x wire connector crimps
Smev 8821 with Full Installation Kit and Water Container
Smev 8821 Hob, Sink, Installation Kit EN1949, Tap, 20l Water,TemplateSmev 8821 Hob and Sink Combination Unit with Full EN1949 Installation Kit inc water container - please choose left or right hand sink and appropriate water container.This is one of our most popular installation kits ideally suited to small/mid sized campervan conversions with permanent gas facilities fitted. The components supplied allow the installation to comply with regulation requirements EN1949, this is important for permanent installations to cover insurance requirements.
It is recommended that this kit is installed, or the installation tested by qualified fitters/engineers.Comes with fitting template - without this you will waste 3-5 hours working out the hole shape and fitting points.
Comes with high flow Comet tap.1 x 8821 combination unit - R/H Sink
1 x 8821 fitting template
1 x 8 mm bulkhead mounted regulator with pressure test point
1 x Butane gas pigtail
1 x 907 camping gas adapter
1 x 8mm compression joint
2 x gas vents
2m of 8mm copper pipe
1 x micro-switched tap
1 x waste outlet and plug
1 x 10l/per min submersible pump
1 x 20l Fesh water container
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
2 x hose clips
6 x wire connector crimps
4 x fresh water pipe clips
4 x waste water pipe clips
4 x gas pipe clips
Smev 8821 with Full Installation Kit
Campervan Smev 8821 Hob, Sink & full installation kit Smaller than Smev 9222
£250 inc. VAT
We offer free, comprehensive advice on all aspects of self build campervan conversion. Just give one of our technicians a call on 01271 373853.
Smev 8821 Hob and Sink Combination Unit with Micro-switched Tap and Waste Outlet - R/H SINK SENT AS STANDARD.
Comes with fitting template - without this you will waste 3-5 hours working out the hole shape and fitting points.
Comes with high flow Comet tap
1 x 8821 combination unit
1 x 8821 fitting template
1 x 8mm bulkhead mounted regulator with pressure test point
1 x Butane gas pigtail
1 x 907 camping gas adapter
1 x 8mm compression joint
2 x gas vents
2m of 8mm copper pipe
1 x micro-switched tap
1 x waste outlet and plug
1 x 10l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
2 x hose clips
6 x wire connector crimps
Smev 8821 with Standard Installation Kit and Water Container
Caravan/Motorhome Smev 8821 Hob, Sink and Tap, Installation kit & 20l water container
Comes with fitting template - without this you will waste 3-5 hours working out the hole shape and fitting points.
Comes with high flow Comet tap.
1 x Smev 8821 combination hob and sink with drainer - L/H Sink
1 x Camping gas regulator
1 x 8mm compression joint
1 x 8mm compression nozzle
1 x gas vent
2m of 8mm copper pipe
1 x 1m flexi gas hose
1 x micro-switched tap
1 x waste outlet and plug
1 x 20l water container
1 x 10l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
4 x hose clips
6 x wire connector crimps
4 x gas fixing clips
4 x waste pipe fixing clips
4 x water pipe fixing clipsPlease note, all permanent gas installations should be installed or checked by qualified engineer.
The regulator supplied is suitable for portable or removable pod units only, if you require gas components for permanent installations complying to EN1949 please see our other listings incorporating a Bulkhead Mounted regulator kit.
3 x Smev 9222 L/H with Micro-switched Tap, Waste & Fixings and Fitting Template
3 x Smev 9222 with micro-switched tap, waste, fixings and template - L/H Sink (R/H Sink Available on Request)Bulk Discounted price - usual price is £690 inc. VATComes with fitting template - without this it will take you 4-5 hours to workout the hole shape and fitting points.
Comes with high flow Comet tap.
Probably the most popular Smev unit to fit in campervans and motorhomes.
Flush fitting unit with darkened glass protective lids/splashbacks, these units look professional and take up less space then the individual hob and sink units.
Stable, removable cooking platforms. Good size practical sink that allows for the micro-switched tap to be hidden under the glass lid when not in use.
Size - Length - 900mm, Width - 375mm, Sink depth - 152mm
Piezo Ignition
Please note, all permanent gas installations should be installed or checked by qualified engineer.
The regulator supplied is suitable for portable or removable pod units only, if you require gas components for permanent installations complying to EN1949 please see our other listings incorporating a Bulkhead Mounted regulator kit..
(POD unit pictured not included, but available in other listings)
Smev 9222 with full installation kit and Truma regulator
Smev 9222 with full installation kit and Truma regulatorSmev Hob and Sink Combination Unit with Micro-switched Tap, Waste Outlet and plumbing kitComes with high flow rate Comet TapComes with fitting template - without this it will take you 3-4 hours to work out the hole shape and fitting pointsIncluded:
1 x 9222 combination unit with twin glass covers
1 x Smev 9222 hole template
1 x 8 mm EN 1949 Truma regulator with isolation switch and test point
1 x Butane gas pigtail
1 x 907 camping gas adaptor
1 x 8mm compression joint
2 x gas vents
2m of 8mm copper pipe
1 x micro-switched tap
1 x waste outlet and plug
1 x 10l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
2 x hose clips
6 x wire connector crimpsProbably the most popular Smev unit to fit in campervans and motorhomes.
Flush fitting unit with darkened glass protective lids/splashbacks, these units look professional and take up less space than the individual hob and sink units.
Stable, removable cooking platforms. Good size practical sink that allows for the micro-switched tap to be hidden under the glass lid when not in use.Size - Length - 900mm, Width - 375mm, Sink depth – 230mmThis kit has everything you need to plumb and fit the unit - except the water container. We have a variety of water containers available. Please call us on 01271 373853 if you require a 10l, 12l, 20l or underslung water carrier to complete your installation.
Please note gas installations should be fitted and tested by qualified engineers.
SMEV 9222 with Standard Installation Kit and Water Container
SMEV 9222 with Full Installation Kit and Water ContainerSmev Hob and Sink Combination Unit with full installation kit for gas and water.Includes;
1 x 9222 combination unit with twin glass covers
1 x 9222 hole template
1 x Camping gas regulator
1 x 8mm compression joint
1 x 8mm compression nozzle
1 x gas vent
2m of 8mm copper pipe
1 x 1m flexi gas hose
1 x micro-switched tap
1 x waste outlet and plug
1 x 10l, 12l or 20l water container
1 x 14l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
4 x hose clips
6 x wire connector crimps
4 x gas fixing clips
4 x waste pipe fixing clips
4 x water pipe fixing clipsComes with fitting template - without this it will take you 4-5 hours to work out the hole shape and fitting points.Comes with high flow Comet tap.Piezo IgnitionProbably the most popular Smev unit to fit in campervans and motorhomes.
Flush fitting unit with darkened glass protective lids/splashbacks, these units look professional and take up less space than the individual hob and sink units.
Stable, removable cooking platforms. Good size practical sink that allows for the micro-switched tap to be hidden under the glass lid when not in use.Size - Length - 900mm, Width - 375mm, Sink depth - 152mmPlease note, all permanent gas installations should be installed or checked by qualified engineer.
The regulator supplied is suitable for portable or removable pod units only, if you require gas components for permanent installations complying to EN1949 please see our other listings incorporating a Bulkhead Mounted regulator kit.
Smev 9222 with Standard Installation Kit
Smev 9222 with Full Installation KitSmev 9222 with Full Installation Kit - Smev Hob and Sink Combination Unit with full installation kit for gas and water.Includes;
1 x 9222 combination unit with twin glass covers
1 x 9222 hole template
1 x Camping gas regulator
1 x 8mm compression joint
1 x 8mm compression nozzle
1 x gas vent
2m of 8mm copper pipe
1 x 1m flexi gas hose
1 x micro-switched tap
1 x waste outlet and plug
1 x 14l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
4 x hose clips
6 x wire connector crimps
4 x gas fixing clips
4 x waste pipe fixing clips
4 x water pipe fixing clipsComes with fitting template - without this it will take you 4-5 hours to work out the hole shape and fitting points.Comes with high flow Comet tap.Piezo IgnitionSize - Length - 900mm, Width - 375mm, Sink depth - 152mmPlease note, all permanent gas installations should be installed or checked by qualified engineer.
The regulator supplied is suitable for portable or removable pod units only, if you require gas components for permanent installations complying to EN1949 please see our other listings incorporating a Bulkhead Mounted regulator kit.
Smev 8821 and Installation Kit
Smev 8821 and installation kit
Comes with fitting template - without this you will waste 3-5 hours working out the hole shape and fitting points.
Comes with high flow Comet tap.
Smev 8821 Hob and Sink Combination Unit with Micro-switched Tap and Waste Outlet
1 x Smev 8821 combination unit
1 x 8821 fitting template
1 x 8mm Bulkhead regulator with test point
1 x Butane gas pigtail
1 x 907 camping gas adaptor
1 x 8mm compression joint
2 x gas vents
2m of 8mm copper pipe
1 x micro-switched tap
1 x waste outlet and plug
1 x 14l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
2 x hose clips
6 x wire connector crimps
Flush fitting unit with darkened glass protective lids/splashback, these units look professional and take up less space than the individual hob and sink units.
Stable, removable cooking platform and removable drainer. Good size practical sink that allows for the micro-switched tap to be hidden under the glass lid when not in use.
Size - Length - 525mm, Width - 420mm, Sink depth – 130mm
Piezo Ignition