No products in the cart.
PAYPAL CREDIT
Finance Available
Clearcut Conversions has partnered with Pegasus Finance to offer you finance on your campervan conversion & parts purchases with us (on orders over £1,000). Simply follow this link and apply. Upon approval, you will receive your funds directly into your bank account and then make your purchases as normal direct with us.
Smev 8821 with Full Installation Kit and Water Container
Smev 8821 Hob, Sink, Installation Kit EN1949, Tap, 20l Water,TemplateSmev 8821 Hob and Sink Combination Unit with Full EN1949 Installation Kit inc water container - please choose left or right hand sink and appropriate water container.This is one of our most popular installation kits ideally suited to small/mid sized campervan conversions with permanent gas facilities fitted. The components supplied allow the installation to comply with regulation requirements EN1949, this is important for permanent installations to cover insurance requirements.
It is recommended that this kit is installed, or the installation tested by qualified fitters/engineers.Comes with fitting template - without this you will waste 3-5 hours working out the hole shape and fitting points.
Comes with high flow Comet tap.1 x 8821 combination unit - R/H Sink
1 x 8821 fitting template
1 x 8 mm bulkhead mounted regulator with pressure test point
1 x Butane gas pigtail
1 x 907 camping gas adapter
1 x 8mm compression joint
2 x gas vents
2m of 8mm copper pipe
1 x micro-switched tap
1 x waste outlet and plug
1 x 10l/per min submersible pump
1 x 20l Fesh water container
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
2 x hose clips
6 x wire connector crimps
4 x fresh water pipe clips
4 x waste water pipe clips
4 x gas pipe clips
Smev 8821 with Full Installation Kit
Campervan Smev 8821 Hob, Sink & full installation kit Smaller than Smev 9222
£250 inc. VAT
We offer free, comprehensive advice on all aspects of self build campervan conversion. Just give one of our technicians a call on 01271 373853.
Smev 8821 Hob and Sink Combination Unit with Micro-switched Tap and Waste Outlet - R/H SINK SENT AS STANDARD.
Comes with fitting template - without this you will waste 3-5 hours working out the hole shape and fitting points.
Comes with high flow Comet tap
1 x 8821 combination unit
1 x 8821 fitting template
1 x 8mm bulkhead mounted regulator with pressure test point
1 x Butane gas pigtail
1 x 907 camping gas adapter
1 x 8mm compression joint
2 x gas vents
2m of 8mm copper pipe
1 x micro-switched tap
1 x waste outlet and plug
1 x 10l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
2 x hose clips
6 x wire connector crimps
Smev 8821 with Standard Installation Kit and Water Container
Caravan/Motorhome Smev 8821 Hob, Sink and Tap, Installation kit & 20l water container
Comes with fitting template - without this you will waste 3-5 hours working out the hole shape and fitting points.
Comes with high flow Comet tap.
1 x Smev 8821 combination hob and sink with drainer - L/H Sink
1 x Camping gas regulator
1 x 8mm compression joint
1 x 8mm compression nozzle
1 x gas vent
2m of 8mm copper pipe
1 x 1m flexi gas hose
1 x micro-switched tap
1 x waste outlet and plug
1 x 20l water container
1 x 10l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
4 x hose clips
6 x wire connector crimps
4 x gas fixing clips
4 x waste pipe fixing clips
4 x water pipe fixing clipsPlease note, all permanent gas installations should be installed or checked by qualified engineer.
The regulator supplied is suitable for portable or removable pod units only, if you require gas components for permanent installations complying to EN1949 please see our other listings incorporating a Bulkhead Mounted regulator kit.
Smev 8821 with Micro-Switched Tap
Smev 8821 Campervan Hob/Sink, Drainer, Micro-switched Tap Motorhome/CaravanSmev 8821 Hob and Sink Combination Unit with Micro-switched Tap and Waste Outlet
Pod Unit Not Included.Comes with fitting template - without this you will waste 2-3 hours working out the hole shape and fitting points.
Comes with high flow rate Comet tap
Smev 8821 and Installation Kit
Smev 8821 and installation kit
Comes with fitting template - without this you will waste 3-5 hours working out the hole shape and fitting points.
Comes with high flow Comet tap.
Smev 8821 Hob and Sink Combination Unit with Micro-switched Tap and Waste Outlet
1 x Smev 8821 combination unit
1 x 8821 fitting template
1 x 8mm Bulkhead regulator with test point
1 x Butane gas pigtail
1 x 907 camping gas adaptor
1 x 8mm compression joint
2 x gas vents
2m of 8mm copper pipe
1 x micro-switched tap
1 x waste outlet and plug
1 x 14l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
2 x hose clips
6 x wire connector crimps
Flush fitting unit with darkened glass protective lids/splashback, these units look professional and take up less space than the individual hob and sink units.
Stable, removable cooking platform and removable drainer. Good size practical sink that allows for the micro-switched tap to be hidden under the glass lid when not in use.
Size - Length - 525mm, Width - 420mm, Sink depth – 130mm
Piezo Ignition
Smev 8821 with Micro-switched Tap, Waste Outlet, Hose and Regulator
Smev 8821 Hob and Sink Combination Unit with Micro-switched Tap and Waste Outlet
Comes with fitting template - without this you will waste 3-5 hours working out the hole shape and fitting points.
Comes with high flow rate Comet tap, Hose and Camping Gaz Regulator
Flush fitting unit with darkened glass protective lids/splashback, these units look professional and take up less space than the individual hob and sink units.
Stable, removable cooking platform and removable drainer. Good size practical sink that allows for the micro-switched tap to be hidden under the glass lid when not in use.
Size - Length - 525mm, Width - 420mm, Sink depth - 130mm
Piezo Ignition
Please choose which side sink you requirePlease note, all permanent gas installations should be installed or checked by qualified engineer.
The regulator supplied is suitable for portable or removable pod units only, if you require gas components for permanent installations complying to EN1949 please see our other listings incorporating a Bulkhead Mounted regulator kit.