No products in the cart.
PAYPAL CREDIT
Finance Available
Clearcut Conversions has partnered with Pegasus Finance to offer you finance on your campervan conversion & parts purchases with us (on orders over £1,000). Simply follow this link and apply. Upon approval, you will receive your funds directly into your bank account and then make your purchases as normal direct with us.
3 x Smev 9722 with Micro-Switched Tap, Waste, Fixings and Template
3 x Smev 9722 with micro-switched tap, waste, fixings and templateBulk Discounted price – usual price is £690 inc. VATComes with fitting template – without this it will take you 4-5 hours to workout the hole shape and fitting points.
Comes with Reich Deluxe Cold Tap, shown in second picture.
Probably the most popular Smev unit to fit in campervans and motorhomes.
Flush fitting unit with darkened glass protective lids/splashbacks, these units look professional and take up less space then the individual hob and sink units.
Stable, removable cooking platforms. Good size practical sink that allows for the micro-switched tap to be hidden under the glass lid when not in use.
Size – Length – 760mm, Width – 325mm, Sink depth – 120mm
Piezo Ignition
Please note, all permanent gas installations should be installed or checked by qualified engineer.
The regulator supplied is suitable for portable or removable pod units only, if you require gas components for permanent installations complying to EN1949 please see our other listings incorporating a Bulkhead Mounted regulator kit..
Smev 9722 with Full installation Kit, Truma Regulator and Water Container
Smev 9722 with Full Installation Kit and Truma RegulatorSmev Hob and Sink Combination Unit with Micro-switched Tap, Waste Outlet and Plumbing KitComes with Reich Deluxe Cold Tap, shown in second picture.Comes with fitting template – without this it will take you 3-4 hours to work out the hole shape and fitting pointsIncluded:
1 x 9722 combination unit with twin glass covers
1 x Smev 9722 hole template
1 x 8 mm EN 1949 Truma regulator with isolation switch and test point - Bulkhead mounted.
1 x Butane gas pigtail
1 x 907 camping gas adaptor
1 x 8mm compression joint
2 x gas vents
2m of 8mm copper pipe
1 x micro-switched tap
1 x waste outlet and plug
1 x 10l/per min submersible pump
1 x Water Container either 10L, 12L or 20L
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
2 x hose clips
6 x wire connector crimpsSize – Length – 760mm, Width – 325mm, Sink depth – 120mmPlease note gas installations should be fitted and tested by qualified engineers.
Smev 9722 with Full Installation Kit and Truma Regulator
Smev 9722 with full installation kit and Truma regulatorSmev Hob and Sink Combination Unit with Micro-switched Tap, Waste Outlet and Plumbing KitComes with Reich Deluxe Cold Tap, shown in second picture.Comes with fitting template – without this it will take you 3-4 hours to work out the hole shape and fitting pointsIncluded:
1 x 9722 combination unit with twin glass covers
1 x Smev 9722 hole template
1 x 8 mm EN 1949 Truma regulator with isolation switch and test point
1 x Butane gas pigtail
1 x 907 camping gas adaptor
1 x 8mm compression joint
2 x gas vents
2m of 8mm copper pipe
1 x micro-switched tap
1 x waste outlet and plug
1 x 10l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
2 x hose clips
6 x wire connector crimpsSize – Length – 760mm, Width – 325mm, Sink depth – 120mmPlease note gas installations should be fitted and tested by qualified engineers.This kit has everything you need to plumb and fit the unit – except the water container. We have a variety of water containers available. Please call us on 01271 373853 if you require a 10l, 12l, 20l or underslung water carrier to complete your installation.
Smev 9722 Hob & Sink with Micro-switched Tap, Waste Outlet, Hose and Regulator
Smev 9722 Hob & Sink with Micro-switched Tap, Waste Outlet, Hose and Regulator with Piezo IgnitionComes with fitting template – without this it will take you 4-5 hours to work out the hole shape and fitting points.Comes with Reich Deluxe Cold Tap, shown in second picture.Size – Length – 760mm, Width – 325mm, Sink depth – 120mmPlease note, all permanent gas installations should be installed or checked by qualified engineer.
The regulator supplied is suitable for portable or removable pod units only, if you require gas components for permanent installations complying to EN1949 please see our other listings incorporating a Bulkhead Mounted regulator kit.
Smev 9722 Hob & Sink with Micro-switched Tap, Waste Outlet and Template
Smev 9722 Hob and Sink Combination Unit with Micro-switched Tap and Waste Outlet with Piezo IgnitionComes with fitting template - without this you will waste 4-5 hours working out the hole shape and fitting points.Comes with high flow rate Comet tapSize - Length - 760mm, Width - 325mm, Sink depth - 120mm
SMEV 9722 Hob & Sink with Full Standard Installation Kit and Water Container
Smev Hob and Sink Combination Unit with Full Installation Kit for Gas and Water, Piezo Ignition
Includes;1 x 9722 combination unit with twin glass covers
1 x 9722 hole template
1 x Camping gas regulator
1 x 8mm compression joint
1 x 8mm compression nozzle
1 x gas vent
2m of 8mm copper pipe
1 x 1m flexi gas hose
1 x micro-switched tap
1 x waste outlet and plug
1 x water container either 10L, 12L or 20L
1 x 10l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
4 x hose clips
6 x wire connector crimps
4 x gas fixing clips
4 x waste pipe fixing clips
4 x water pipe fixing clipsComes with fitting template – without this you will waste 4-5 hours working out the hole shape and fitting points.Comes with Reich Deluxe Cold Tap, shown in second picture.Size – Length – 760mm, Width – 325mm, Sink depth – 120mmPlease note, all permanent gas installations should be installed or checked by qualified engineer.
The regulator supplied is suitable for portable or removable pod units only, if you require gas components for permanent installations complying to EN1949 please see our other listings incorporating a Bulkhead Mounted regulator kit.
Smev 9722 with Full Standard Installation Kit
Smev Hob and Sink Combination Unit with Full Installation Kit for Gas and Water, Piezo Ignition
Includes;1 x 9722 combination unit with twin glass covers
1 x 9722 hole template
1 x Camping gas regulator
1 x 8mm compression joint
1 x 8mm compression nozzle
1 x gas vent
2m of 8mm copper pipe
1 x 1m flexi gas hose
1 x micro-switched tap
1 x waste outlet and plug
1 x 10l/per min submersible pump
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
4 x hose clips
6 x wire connector crimps
4 x gas fixing clips
4 x waste pipe fixing clips
4 x water pipe fixing clipsComes with fitting template – without this you will waste 4-5 hours working out the hole shape and fitting points.Comes with Reich Deluxe Cold Tap, shown in second picture.Size – Length – 760mm, Width – 325mm, Sink depth – 120mmPlease note, all permanent gas installations should be installed or checked by qualified engineer.
The regulator supplied is suitable for portable or removable pod units only, if you require gas components for permanent installations complying to EN1949 please see our other listings incorporating a Bulkhead Mounted regulator kit.
£299.25 – £304.00Select options