How To Guides - Instructions for self-fitting Campervan Components

Fitting your Gas Hob

There are many variables within a hob and gas installation, this information should be viewed as a theoretical guide to aid the installation of the products we sell. The information in this How To Guide does not substitute gas qualifications or competency for gas installation.This How To Guide should not be taken as comprehensive instruction on how your individual gas system should be installed, due to the individual design variations on each installation.

Click Here For Information On Planning To Fit Your Gas Hob

Plumbing and Wiring your Campervan Sink

This How to Guide will run through a basic campervan installation for a drop in submersible pump and cold water only supply

Click Here For Suggestions On Plumbing and Wiring A Campervan Sink

Fit Your CBE/ C-Line Sockets

In this How To Guide, we will explain how to fit a range of CBE/C-Line Sockets and switches, we offer a wide choice of combinations so it allows you to place the sockets and switches just as you'd like them.Installation of the following are covered;12v Sockets240v sockets12v USB12 wall SwitchesBattery Condition MonitorLight Dimmer4 way 12v fuse holder

Click Here For Instructions On Fitting CBE Sockets

Fitting your Campervan Table

There are a variety of designs of campervan tables in this brief guide we cover the following; ▪ Folding table leg and rail (stow-a-way version) ▪ Sequoia locking table system ▪ Tapered leg floor mounted table ▪ Swing-out, side mounted table We manufacture a huge range of table sizes and shapes as well as producing bespoke sized tables on request. The following instructions are specific to the table sets that we sell.

Click Here For Instructions On How To Fit your Campervan Table

Install your Leisure Battery

The leisure battery is probably the most commonly added facility to a campervan layout.

Click Here For Instructions On How To Install your Leisure Battery

Fit your Clearcut Shelf

Our shelves are perfect for all those bits and bobs that never seem to have their own storage spot and end up rolling around the van.The Shelves are very easy to install, click the link below to read more on this guide

Click Here For Instructions On How To Fit your Clearcut Shelf

Panel, Insulate and Line your Van

This guide gives detailed information on how to Panel, Insulate and Line your van, this is based on a SWB T5, but the principles can be used for all builds.

Click Here For Instructions On How To Panel, Insulate and Line your Van

Fitting Your Reimo Awning Rail

The Reimo Awning rail is a neat looking aluminium, powder coated rail that enables your free standing awning to be secured tightly onto your van. This guide will advise on fitting to your van.

Click Here For Instructions To Fit your Reimo Awning Rail

Fit Your Rear Seat Panel

Our Rear Seat Panels are a great way to neaten up the back of your van.Easily removable with a push fit and magnetic fitting they are available in 12 finishes to match or compliment your existing furniture or colours.

Click Here For Instructions On Fitting Rear Seat Back Panel

Installing Your 12v Compressor Fridge

The 12V Compressor Fridge is pretty straight forward to install, however, there are some factors to consider before fitting.This guide goes through those points prior to your ting and also guides you with the complete installation as well.

Click Here For Tips On Installing Your 12v Fridge

Fit Your Tambour Doors

Installation of Tambour Doors can be achieved in several ways, this handy guide will explore which way best suits your layout.

Click Here For Instructions On How To Fit Your Tambour Door Kit

Installing PMS3 Unit

The PMS3 comes with wiring instructions and a comprehensive wiring diagram. We recommend you read and understand the instructions prior to fitting.However, when fitting into a campervan, and connecting the PMS3 to a 12v compressor fridge you may find our How To Guide helpful.

Click Here For Tips on Installing Your PMS3 Unit

Installing LED Lights

We stock many different LED light options for your campervan, this guide will go through a couple of ways in which you can install them.

Click Here For Instructions on Installing LED Lights

Fitting your Clearcut Pod Unit

Follow the steps in this How To Guide, to install your Clearcut Pod Unit

Click Here For Instructions to Fit Your Clearcut Pod

Planning Your Campervan Build

The focus of this How To Guide is directed at planning and design considerations before any work is undertaken.

Click Here For Ideas on Planning your Campervan Build

Installing Black Out Curtains

This How To Guide explains how to install our Blackout Curtain range. Fitting a full set of curtains will take a bit of time, allow approx. 30-45 minutes to fit each curtain set.The guide also includes product codes to purchase the components required.

Click Here For Instructions on Installing Black Out Curtains

Setting Doors into Campervan Furniture

There are several ways of setting doors and openings for your furniture – Flush, Surface Mounted and Partially Recessed are all options.This How To Guide looks at the partially recessed option which presents a much more professional finish.The guide also includes product codes to purchase the components required.Click the link below to read more on this guide ⬇

Click Here For Instructions on Setting Doors into Furniture

RIB Altair Seat Anchorage Kit Instructions – 130cm and 150cm Widths, Slider Frame

Our RIB Altair seat anchorage kit is only suitable for VW T5 and T6 vans (SWB and LWB). It allows the seat to be fitted in a variety of positions, and has been M1 tested to ECE R14 requirements.A test video can be viewed here; https://youtu.be/Ueo9T7bd9Ck.A full summary of the testing can be viewed herePlease download our Fitting Instructions for your RIB Seat from the link below.