No products in the cart.
PAYPAL CREDIT
Finance Available
Clearcut Conversions has partnered with Pegasus Finance to offer you finance on your campervan conversion & parts purchases with us (on orders over £1,000). Simply follow this link and apply. Upon approval, you will receive your funds directly into your bank account and then make your purchases as normal direct with us.
600mm Round Table Kit with Sequoia Leg
600mm Round Table Top with Sequoia Leg
The set comes with the Sequoia Leg and Collar design.This allows for a very stable platform, far superior to the older, cheaper tapered designs.The leg screws and locks down onto the lower floor plate. The floor plate itself doesn't need a hole drilled through the floor of the van like most other designs. As there is no clearance hole required through the floor of the van, the positioning of the floor plate in the most desired position is much easier.For installation instructions, please click HERE to be taken to our How To Guide.Click HERE for our Furniture Board Samples page.
£105.00 – £110.00Select options
Mazda Bongo Rear Unit With Side Seat Boxes
Mazda Bongo Rear Campervan Conversion Unit With Side Seat Boxes.
£1,650 inc vat
Fitted price - Additional £245 including vat, allow 5 hours for fitting and wiring
£1,795.00Add to basket
Mazda Bongo Basic Rear Weekender
Mazda Bongo - Standard Rear Weekender
Light weight Furniture board used throughout
The pod can be delivered to you on a pallet (£75inc vat), or collected from our workshop.
Order on-line and customise your finishes from the selections below; lead-time approximately 5 - 6 weeks.
Order by Phone on 01271 373853 and talk though your requirements with one of our experienced staff.
Order By E-mail enquiries@clearcutconversions.co.uk to send us your bespoke requirements
£995.00Add to basket
Mazda Bongo Rear Weekender Conversion Unit
Mazda Bongo - Standard Rear Weekender
Supply Only (Standard) - £1,295 inc vat (Specification as below)
£1,450.00Add to basket
Tourer
Mazda Bongo Campervan Conversion - Tourer Design
£5,750inc vat
Fridge - 38 litre Danfoss BD35F 12v compressor with Ice-box and battery protection Sink - (With external outlet) – Stainless steel smev sink, with darkened glass protective lid. Hob - Stainless steel Smev twin hob with darkened glass protective lid and 904 gas regulator. Top locker storage with 3 integral LED downlighters - perfect for tea, coffee and biscuits. Power Management Unit (PMS3) with 240v to 12v power inversion, secondary split charge relay, 18 amp battery charging, battery condition monitor and fused outlets. Water - 20L, In-line submersible pump 12v micro-switched tap. Electric hook-up - With flush external power inlet. Built in RCD with 2 three pin socket and 12m cable. Storage – plenty of storage space both for food and clothing, including a corner closet. Rear facing small bench seat with upholstered top and integral storage - allows 4 people to sit around the centralised table.- can also accommodate a porta potti if requested. Smartbed Seating system, two integral shoulder belts, air-ram assisted close, bearing runner drawerout and multiple recliner lock off positions. Four inch cushions - with quality coverings in a choice of colours. 12mm Ply flooring with Altro non-slip covering. 12v power outlet socket 12v LED lighting 110 amp leisure battery - a powerful battery with battery tray, clamps, and split relay charging. Stow-a-way table - rail mounted with hinged leg Choice of finishes Fire extinguisher Please note: Campervan Conversions are not available to purchase online. If you are interested in any of the conversion options then please contact us on 01271 373853.
Familyvan Design
Mazda Bongo Campervan Conversion - Familyvan Design
£3450inc vat
Fridge - 38 litre Danfoss BD35F 12 volt compressor with ice box and battery protection Sink - (with external outlet) - Stainless steel Smev sink with darkened glass protective lid Hob - Stainless steel Smev twin hob with darkened glass protective lid and 904 gas regulator Water - Stainless steel Smev sink with 12 litre water supply, 12v micro switched tap and in-line submersible pump Electric hook-up - with flush external power inlet Built-in RCD with 2 three-pin socket and 12 metre connection cable Leisure Battery - 110 amp battery, battery tray and split charge wiring loom. 12v Socket outlet - mounted to conversion and wired to leisure battery Storage - plenty of storage space for both food and clothing Top-locker - twin food storage lockers located above conversion with built in downlighters Sliding bench seats - a versatile layout easily converted to a bed, with built-in storage space Upholstered cushions - with quality, zipped, washable covers in a choice of colours Stowaway rail-mounted table with hinged leg Fire extinguisher Please note: Campervan Conversions are not available to purchase online. If you are interested in any of the conversion options then please contact us on 01271 373853.
Mini Tourer
A new design, this conversion is an ideal for those who need full conversion facilities on a budget. The conversion items are also easily removable for those times when you need the Bongo as a van. Again the conversion offers everything you need for a decent length trip of a week or more. The conversion features plenty of storage and a top-loading Waeco compressor fridge capable of freezing to -15C. The design can be fitted with the mid row seats forward facing to make use of the shoulder belts or rear facing to open up a more usable lounge space (as in the pictures above). This conversion is very difficult to beat on price, it is ideal for those older Bongos where consideration of cost spent on the vehicle is a priority - if required the conversion could easily be taken out and fitted to the next Bongo you purchase. We expect this conversion to be popular with families and couples alike.Base price: £2,500Please note: Campervan Conversions are not available to purchase online. If you are interested in any of the conversion options then please contact us.
Side Weekender
This Kitchenette is perfect for your Mazda Bongo Conversion. The conversion is self contained and as such can be taken out when not in use or if you need the extra space. It is designed to fit in on the original seat mounting points of the Split rear seat Bongo/Freda, although we can also make them up to fit if you have the full length seat rail version.
Fitted while you wait: £950
Supply only: £895
Please note: Campervan Conversions are not available to purchase online. If you are interested in any of the conversion options then please contact us.