2 x 215W 12V Rigid Solar Panel Kit with 50Amp MPPT Regulator (Photonic Universe) and Wiring Kit

This kit includes:

• 2 x 215W rigid solar panel
• 2 x cable entry glands – mounting kit
• Your choice of regulator
• 20-amp standard fuse
• Heat shrink tube 16mm
• Red and black 44 strand wire 5m
• Butt connectors
• Inline fuse holder
• Ring crimps
• 4 x side mounts

Solar Panel – 215W 12V Victron Energy Rigid Framed Mono Series (Silver/Black) – New Product

• 15kg
• 1580 x 808 x 35mm
• Monocrystalline solar cell for high efficiency charging in all weathers
• Water resistant and robust for outdoor use
• 5-year manufacturer warranty
• High performance bypass diodes minimize power drop caused by shade
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high voltage operation
• Tempered glass provides extra stiffness and impact resistance

Regulator included with this kit:

A solar charge controller gathers energy from your solar panels and stores it in your batteries. Using the most up-to-date technology, Smart Solar maximises this energy-harvest, utilising it intelligently to achieve full charge in the shortest possible time. Smart Solar maintains battery health, extending its life.

Features:

• Bluetooth smart built in enables set-up, monitoring, updating and synchronisation with a smart phone or other Bluetooth enabled device.
• VE. Direct allows wired data connection to a Color Control GX, other GX products, PC or other devices.
• Ultra-fast Maximum Power Point Tracking (MPPT) – Especially in case of a cloudy sky, when brightness is changeable, the MPPT will improve the harvesting of energy by up to 30% compared to PWM controllers.
• Load output will disconnect the load when the battery has been discharged to a pre-set voltage.
• Battery life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level until the harvested solar energy is sufficient to recharge the battery to near 100%
• Over-temperature protection and power de-rating when temperature is high.
• A BMV battery monitor can be used to communicate battery voltage & temperature to one or more SmartSolar Charge Controllers

Specification:

• Battery voltage (auto select): 12/24
• Rated charge current: 50A
• Nominal PV power, 12V: 700W
• Nominal PV power, 24V: 1400W
• Max. PV short circuit current: 60A
• Max. PV open circuit voltage: 100V
• Peak efficiency: 98%
• Charge voltage ‘absorption’: 14,4V/28,8V/57,6V (adj.)
• Charge voltage ‘float’: 13,8V/27,6V/55,2V (adj.)
• Charge algorithm: multi-stage adaptive
• Temperature compensation: -16mV/C resp. -32mV/C
• Max continuous load current: 20A/20A/1A
• Low voltage load reconnects: 13,1V/26,2V/52,4V or 14V/28V/56V or Battery Life algorithm
• Protection: Output short circuit/Over temperature
• Operating temperature: -30 to +60C (full rated output up to 40C)
• Humidity: 95%, non-condensing
• Data communication port: VE.Direct
• Power terminals:6mm2/AWG10
• Protection category: IP43 (electronic components), IP22 (connection area)
• Weight: 1.3kg
• Dimensions: h130mm x w186mm x d70mm
• Safety: EN/IEC 62109-1, UL 1741, CSA C22.2
• Data stored: Battery voltage, current & temperature, as well as load output current, PV voltage & PV current
• Number of days trends data is stored: 46