Navigation
Account

No products in the cart.

Description

Description

Choosing your Seat Specification.

Often customers have a specific requirement of seating, based on the look and specification required for their van conversion. We are able to cater for your individual requirements by ordering seats to your specification direct from the Scopema (RIB Altair Manufacturer’s factory). The RIB Altair is available with a variety of options and a multitude of bespoke finishes in Fabric, Vinyl and leather.

Bespoke orders should be placed with one of our sales team by phone (01271 373853 Option 2)  or e-mail, enquiries@clearcutconversions.co.uk. Our team will be able to talk you through your order , and with excellent product knowledge ensure the seat you choose is the best possible match to your requirements, this will then be confirmed by e-mail for complete piece of mind.

Below is an outline of the various seat options available and their individual cost. You will be able to cost up your seat prior to ordering, working off the baseline seat specification and adding in any options required.

 

Base Line Seat specification.

RIB Altair 112cm seating system, Integral headrests with 2 x integrated shoulder belt harnesses. Trimmed in choice of single or two-tone Sarabella fabric Range (See Swatch page) Frame clearance set at 330mm (Suitable for VW T5 and T6 vehicles). Rear nearside corner cut out on back cushion to allow the bed to lie at the very back of the vehicle.

Choice of Fabric in the popular Sarabella Range; single or two-tone options fabric

Up-Grade to OEM matching fabric, single or two tone colours. (This is when you want the seats to match the front OEM fabric of your vehicle)  See the Swatch Page for reference.

Up-grade to Vinyl, single or two tone colour. (Seat faces only) The sleeping face and rear parcel shelf will be trimmed with a matching suede type finish, this is for comfort when the seat is folded flat to form a bed.

Up-grade to Leather, single or two tone colour. (Seat faces only) The sleeping face and rear parcel shelf will be trimmed with a matching suede type finish, this is for comfort when the seat is folded flat to form a bed.

Integrated seat slider, movement of 220mm between lower base and upper cushion set. Increases versatility and storage options particularly when the seat is being fitted with a side conversion on a SWB vehicle.( Ask our sales staff about this if you’re unsure)

Reduced Frame Clearance Height. The standard seats we sell are set at 330mm frame clearance and this works well on a VW T5 and T6 to clear the rear wheel arch. However, if you are ordering the seat for a VW T4, Renault Trafic, Vivaro or Mercedes Vito, we often recommend that a reduced frame height is used, this will provide you with better headroom in these vehicles and a more comfortable sitting position. (Ask our sales staff for more information)

Isofix child seat attachments. 2 x  integral isofix attachments are incorporated into the frame and cushion sets for easy removal of car seats.

Integrated arm rests. These are a bit of luxury and do add considerable extra comfort on journey times. The arm rests sit flush into the upholstery when not in use.

Extra long parcel shelf/back cushion. The extended cushion length gives both greater storage as a parcel shelf and also extra length as a bed totaling 1940mm when extended out.

 

 

More Info

Additional information

Slider

Not required, Add lengthwise slider + £120

Isofix

Not required, Add isofix (2 places) + £120

Fabric

Sarabella, OEM + £60, Vinyl + £80, Leather + £550

Armrest

Not required, Add integrated armrests +£180

Back to top