Sargent – PF200 Leisure Battery Charger
£87.50
This standalone charger can be fitted alongside our power supply units for customers require more power. There are no switches on this unit either which mean it does not need to be on display within a van.
This system is configured to work with standard lead acid batteries and in most cases is also compatible with AGM batteries and many lithium batteries with built in battery management systems which are compatible with an input voltage of 13.8V.
Please check compatibility before fitting non-standard batteries by referring to the battery documentation or manufacturer.
The recommended battery capacity is 85 to 110Ah. This would not be suitable for larger or multiple batteries.
The battery feed should be fitted with an inline fuse (20A) between the battery and the electrical harness.
The charger input should be protected by a 5A fuse and/or a suitable miniature circuit breaker.
The output of the charger should be fused at 15A maximum as close to the charger as possible.
During stage 1 the battery voltage is increased gradually while the current is limited to start the charging process and protect the battery. At stage 2 the voltage rises to 13.8V to deliver the bulk charge to the battery. When the battery is charged, the float charge is maintained at 13.8V. The charger can be left switched on continuously as required.
The battery charger / power converter can also provide power to the leisure equipment when the mains supply is connected. This module supplies DC to the leisure equipment up to a maximum of 13.9 Amps (192 Watts), therefore the available power is distributed between the leisure load and the battery.
The charger output voltage can be adjusted to compensate for installation voltage drop or to match a particular battery requirement / specification. On the underside of the charger remove the rubber bung to access the adjuster potentiometer. Under normal and typical installations, it is not necessary to adjust the voltage, and not recommended without specialist knowledge.
Specification:
- Input: 230V AC 50Hz 2.4A
- Output: 13.8V DC 192W
- Dimensions: 200 x 63 x 35mm (excl cables)
- Weight: 0.84 Kg
- Input Connection: Stripped and prepared ends
- Output Connection: 2x insulated blade terminals (6.3mm / ¼”)
- Approval: Electromagnetic Compatibility Directive 2014/30/EU EN55015:20013+A1:2015, EN61000-3-2:2014, EN61000-3- 3:2013
- Approval: Low Voltage Directive 2014/35/EU EN61347- 1:2015, EN61347-2-13:2014+A1:2017
9 in stock
