SavvyVan – SavvyShunt 300A Power Management Unit

Gain the true state of charge from your battery and see real-time data of your current loads with our bluetooth add-on, SavvyShunt. 

Plug and Play

We want to make our products as simple as possible to install and setup. SavvyShunt needs to be connected inline between your Negative terminal on your battery and your Van’s ground. Other than that it simply needs a 12v feed to operate! All the software is already on your device to run this add-on, you simply have to connect it and you’re up and running. Couldn’t be simpler!

True State of Charge

As with any Shunt, we are able to measure to a very fine accuracy the current going in or out of your battery. By inputting the AmpHours in the setting menu, SavvyShunt will calculate your % remaining.

Amps, Volts & Watts

See exactly what’s happening at a glance, our shunt provides live information on Amp usage (In & Out) Current Voltage and Watts.

Historical Data

Our shunts are capable of holding up to 10 years worth of data, you can view this on our dedicated battery page and understand your usage over time.

Time to Charge/Discharge

Our shunt will use the data that’s available and calculate the time remaining at the current usage. Whether you are charging or discharging, you can always see how much time is remaining at your current use rate.