Dometic/Smev 9722 with Piezo or Electric Ignition, Full Installation Kit & Truma Regulator

Comes with Florenz deluxe cold tap (Keramik with electric ignition version)

Comes with fitting template – without this it will take you 3-4 hours to work out the hole shape and fitting points

Included:
1 x 9722 combination unit with twin glass covers
1 x Smev 9722 hole template
1 x 8 mm EN 1949 Truma regulator with isolation switch and test point
1 x Butane gas pigtail
1 x 907 camping gas adaptor
1 x 8mm compression joint
2 x gas vents
2m of 8mm copper pipe
1 x Comet Florenz micro-switched tap (Keramik with electric ignition)
1 x waste outlet and plug
1 x 12 lpm submersible pump *upgraded to Seaflo Pump 0.6ba
1 x 2m fresh water pipe
1 x 2m waste water pipe
1 x 2m twin core wire
2 x hose clips
6 x wire connector crimps

Size – Length – 760mm, Width – 325mm, Sink depth – 120mm

Please note gas installations should be fitted and tested by qualified engineers. This kit has everything you need to plumb and fit the unit – except the water container. We have a variety of water containers available. Please call us on 01271 373853 if you require a 10l, 12l, 20l or underslung water carrier to complete your installation.

Probably the most popular Smev unit to fit in campervans and motorhomes.
Flush fitting unit with darkened glass protective lids/splashbacks, these units look professional and take up less space than the individual hob and sink units.
Stable, removable cooking platforms. Good size practical sink that allows for the micro-switched tap to be hidden under the glass lid when not in use.