Dometic/Smev 9722 Hob & Sink with Piezo or Electric Ignition, Standard Installation Kit & Truma Regulator

Dometic/Smev 9722 stainless steel double hob & sink unit with Truma gas and water installation kit.

The Truma gas regulator is a popular premium gas regulator for self-builders.

Included:

• 1 x 9722 combination unit with twin glass covers
• 1 x Dometic/Smev 9722 fitting template – without this it will take you 3-4 hours to work out the hole shape and fitting points
• 1 x 8 mm EN 1949 Truma regulator with isolation switch and test point
• 1 x Butane gas pigtail
• 1 x 907 camping gas adaptor
• 1 x 8mm compression joint
• 2 x gas vents
• 2m of 8mm copper pipe
• 1 x Comet Florenz deluxe micro-switched cold tap (Keramik with electric ignition)
• 1 x waste outlet and plug
• 1 x 12 lpm submersible pump *upgraded to Seaflo Pump 0.6ba
• 1 x 2m fresh water pipe
• 1 x 2m waste water pipe
• 1 x 2m twin core wire
• 2 x hose clips
• 6 x wire connector crimps
• Size – Length – 760mm, Width – 325mm, Sink depth – 120mm

Please note, only a qualified engineer should install or check permanent gas installations.

This kit includes everything you need to plumb and fit the unit—except the water container(s). However, we offer a variety of water containers to suit your needs.

If you require a 10L, 12L, 20L, or underslung water carriers to complete your installation, please call us on 01271 373853.

This is probably the most popular Dometic/Smev unit for campervans and motorhomes. Its flush-fitting design, combined with darkened glass protective lids and splashbacks, gives a professional look while taking up less space than individual hob and sink units.

Additionally, the stable, removable cooking platforms and practical sink provide convenience. The micro-switched tap hides under the glass lid when not in use, further maximising space and usability.