LD851 Double Hob & Sink – with Truma Installation Kit & Water Container

851 with Full Installation Kit, Gok 8mm Regulator & Water Container

Included:

1 x 851 combination unit with twin glass covers

1 x 8 mm EN 1949 Gok 8mm regulator with isolation switch and test point

1 x Butane gas pigtail

1 x 907 camping gas adaptor

1 x 8mm compression joint

2 x gas vents

2m of 8mm copper pipe

1 x Comet London micro-switched tap – Pictured separately

1 x waste outlet and plug

1 x 12 lpm submersible pump *upgraded to Seaflo Pump 0.6ba for 12l containers and Comet pump for 20l containers

1 x 2m fresh water pipe

1 x 2m waste water pipe

1 x 2m twin core wire

2 x hose clips

6 x wire connector crimps

Size – Length – 900mm, Width – 370mm, Depth – 152mm

12v ignition

Comes with fitting template – without this it will take you 4-5 hours to work out the hole shape and fitting points

Please note gas installations should be fitted and tested by qualified engineers. This kit has everything you need to plumb and fit the unit. Please contact us if you require an additional 10l, 12l, 20l or underslung water carrier to complete your installation.

A popular unit to fit in campervans and motorhomes. Flush fitting unit with darkened tempered glass protective lids/splashbacks, these units look professional and take up less space than the individual hob and sink units. Stainless steel 304 with enamelled burner caps and stable, removable cooking platforms. Good size practical sink that allows for the micro-switched tap to be hidden under the glass lid when not in use.