Victron BatteryProtect 12/24V 65A

BatteryProtect 12/24V 65A

Protect your battery from deep discharge and damage with the BatteryProtect 12/24V 65A. This smart device disconnects non-essential loads before your battery is completely drained or too weak to start the engine. The perfect precaution to protect against leaving your led lights 12v sockets on by mistake.

Key Features:

• Over Voltage Protection
  Automatically disconnects loads if voltage exceeds 16V (12V system) or 32V (24V system).
• Ignition Proof Design
  Uses MOSFET switches – no relays, no sparks.
• 12/24V Auto Ranging
  Automatically detects system voltage on first use (re-triggerable via settings).
• Simple Programming
  Choose from multiple engage/disengage voltages. Settings are shown on a clear seven-segment display.
• Delayed Alarm Output
  Activates after 12 seconds of low voltage to avoid false alarms during engine start. Supports buzzer, LED or relay (max. 50 mA).
• Timed Disconnect/Reconnect
  Load disconnects 90 seconds after alarm unless voltage recovers. Reconnects 30 seconds after voltage returns to safe level.
• Li-ion Battery Mode
  Can be controlled via VE.Bus BMS for lithium setups.
• Ultra Low Power Consumption
  Especially useful for preserving charge in Li-ion batteries after shutdown.

Note:
This is a uni-directional device – current flows from the Battery terminal to the Load terminal only. It cannot handle current in both directions simultaneously.